From the Bellissima line, PLASMA 3 D is born , infinite decorative effects in a single product, applicable on any surface and malleable in a multitude of effects: from Crocodile, Wood, Snake, Striped marble, Viper, Wild, Vintage, Granite, to the stencil line . The new exclusive PLASMA 3 D i Marmi line recreates the most precious veins at your convenience and in all the shades you want, to make your environment unique and precious.

P3D FLOOR PUTTY
(2 HANDS) in order to obtain full coverage of the leaks.
For critical surfaces, in the presence of wide and deep joints (3-4 mm), in case of traces for implants or in case of concrete surfaces, it is necessary to insert a fiberglass mesh when applying the first coat of STUCCO P3D FLOOR.
In case of deteriorated cement it is necessary to apply the fiber mesh between the first and second coat of STUCCO P3D FLOOR.
After 6-8 hours sand with 80/100 sandpaper and remove the remaining dust.

PRIMER P3D FLOOR
Ready to go.
Wait 1-2 hours for the product to dry.

INTERMEDIAL P3D FLOOR
(1 – 2 HANDS) white or coloured.

IN CASE OF SMOOTH WALLS WITHOUT TILES
Apply STUCCO P3D WALL (paste filler) 1-2 HANDS.
In the presence of micro cracks in the plaster, insert a fibreglass mesh between the first and second coat and apply a third coat if necessary.
Wait 6-8 hours for the product to dry and proceed with the application of:

PRIMER P3D WALL 
Ready to go.
Wait 1-2 hours for the product to dry.

UNIVERSAL PRIMER
(1 – 2 HANDS) white or coloured.

IN BOTH APPLICATION CASES:
Wait 4-6 hours for the product to dry.
and proceed with the application of the: 3D Plasma
PLASMA 3D Line i Marmi 
(Ready to go)
Apply the product with a trowel in a uniform smoothing way the surface in various directions.
After 3-4 hours apply the second coat and, if necessary, blend in.
with different shades according to the desired wet product effect.
(2-3 hands are recommended).
IT IS POSSIBLE TO APPLY TWO DIFFERENT TYPES OF VITRIFICATION AS NEEDED:
After 48 hours apply two coats of MICROVETRO BI Matt or Glossy
(consoled for light colors)
(Apply the second coat at a distance of 4-6 h.
for the Opaque vitrifying agent and 6-8 h for the Glossy).
(For floors 2-3 coats are recommended) depending on the frequency of walking.
After 48 hours apply two coats of EPOXY VETRO
Wait 24 hours between first and second hand.
(For floors 2-3 coats are recommended)



3D MARBLE PLASMA LINE
LIQUID CRYSTAL
Two-component epoxy finish,
 transparent spatula-shaped, protective mirror.
It gives the crystals a shine,
applicable as last coat
for PLASMA 3D.
APPLICATION:
To obtain a mirror effect, after the first coat of MICROVETRO MONO LUCIDO
he dried product can be applied after about (6-8 hours):
LIQUID CRYSTAL (2 HANDS) 
applying it with a stainless steel trowel evenly.
Wait 24 hours between first and second hand.
(for application specifications see the data sheet).
OPTIONAL APPLICATION:

After 24-48 hours it is possible to apply 1-2 coats of CERAMARMI to protect the surface, prevent wear and preserve the brilliance of the vitrifying agent.

*Further technical information and application videos are available by visiting our website and on our youtube channel.